How to remove mold in the bathroom

Mold in the bathroom can bring a lot of trouble to the owners of the apartment. The reasons for the formation of fungi on the walls may be different, but not all methods can help remove black plaque.

The appearance of mold in the bathroom indicates that the room is poorly ventilated and the humidity is high.

Due to a number of reasons, the bathroom is considered a favorable environment for the formation of fungus. Mold may occur due to high humidity, defective (or insufficiently powerful) ventilation system, lack of natural light. In order not to face such a nuisance as mold in the bathroom, it is very important to carry out the treatment of all surfaces in a timely manner with specially designed means. Special attention should be paid to tile seams.

Fungus on the walls of the bathroom can not only significantly worsen the appearance of the room, but also negatively affect the health of all household members. Mold can cause asthma, candidiasis, allergic rhinitis, and many other infectious diseases.

To date, there are many tools that help to remove mold in the bathroom, but if the cause of its formation is not found and eliminated, the use of any method will give only a temporary result. That is why before you get rid of mold, it is worthwhile to consider in more detail all possible causes.

Reasons for education

Scheme of growth of mold fungi.

Due to insufficient lighting, the bathroom very often becomes a place for the formation of fungi, which are afraid of ultraviolet radiation. In the event that the cause of mold growth is poor lighting, plaque can be found in places such as corners. To ensure that the fungus does not remind itself of itself again, before proceeding to surface treatment, care must be taken to ensure good lighting.

One of the most common reasons for mold formation in the bathroom is poor ventilation. As a rule, the lack of air circulation leads to an increased level of humidity and the accumulation of condensate on the surfaces, which contributes to the rapid expansion of fungi. Before removing mold, make sure that the ventilation system is fully functional.

In order to prevent the formation of mold, some elementary rules should be observed - to regularly ventilate the room, do not soak for a long time underwear, etc. In addition, to prevent the formation of black plaque preventive measures allow that must be timely.

Preventive measures

When removing mold from the surface, it is necessary to use protective equipment to avoid causing an allergic reaction to the hands.

In order to prevent the formation of black mold in the bathroom, you do not need to take preventive measures regularly. In the cold season it is very important to monitor the operation of the radiators, which support the maintenance of dry air in the bathroom. To prevent high humidity, you can use an additional electric heated towel, which will also prevent condensation on the surfaces.

As for preventive measures, it is possible to remove and prevent the formation of mold by means specially designed for this purpose. In this case, all surfaces, in particular those with developing fungal spores, should be thoroughly treated.

As a preventive measure, it is recommended that all surfaces be periodically wiped, in this case the bathroom will not be subject to condensation. In addition, you need to monitor the condition in which tile seams and gaps are located. With special attention it is necessary to treat plumbing fixtures, their defects can also lead to the formation of mold.

To remove mold in the bathroom can be using specially designed antiseptics, but in order to prevent its appearance, it is recommended to use moisture-resistant mastics and grouts to cover the seams of tiles. Using the described means, provided that all factors contributing to the formation of mold, will be eliminated, will ensure that the bathroom was reliably protected from such troubles.

The appearance of fungus

You can fight with mold using soda and vinegar.

As a rule, black mold is formed in several stages, if measures are taken at the initial stage of its proliferation, many unpleasant consequences can be prevented.

The appearance of the fungus is indicated by a specific coating of black, gray or greenish color, which spreads over various surfaces.

In most cases, spores begin to form in places such as interconnected seams, gaps between the wall and the sink (bathroom), etc. The bathroom with plumbing, which has any defects, is exposed to mold in the area of ​​the pipes.

The bathroom, in which the fungus began to form, has a characteristic unpleasant smell of dampness. To get rid of the smell is quite difficult, for this, first of all, it is necessary to eliminate the causes of its appearance, namely mold.

Getting rid of mold

If the bathroom for one of the reasons listed was the place of mold formation, even at its first manifestations it is necessary to take measures. Otherwise, when removing the black plaque, there is a risk of encountering such necessary measures as removing the top cover of the wall. With the help of modern means to get rid of the first manifestations of mold is simple enough, the main thing - to observe all the precautions specified in the instructions.

Traditional means

To remove mold, you can use special chemicals that perfectly destroy mold and fungus.

To remove mold on the walls of the bathroom, basic materials and tools may be required, such as:

• means for the destruction of mold deposits;
• brush or nebulizer for its application;
• A brush, a rigid sponge or a knife to clean the surface of mold;
• building hair dryer;
• a container for dilution of the agent;
• gloves;
• respirator.

Rid of the mold in the bathroom is excellent in the surface treatment with copper sulfate. Divorced vitriol is applied with a brush or spray. Do not forget about the toxicity of the product, while using it, you should use gloves and a respirator. After some time after treatment, the solution should be washed off with warm water.

Not bad results can be achieved with the help of bleach in a diluted form, you can replace it with a conventional bleach. The composition should be strong, it is not necessary to wash it off after applying it to the walls. As for bleach, surface treatment with it is recommended to be repeated several times, since this composition has a lower content of chlorine. When working with these tools, it is very important to comply with security measures.

Modern means are very effective in combating mold in the bathroom. Most of them are safe for health. You can remove the fungus by chemical treatment. Before applying the product, the affected surfaces must be cleaned using a rigid sponge, brush or knife. Then the walls should be dried with a building hair dryer. To apply an antiseptic drug, you can use a spray or brush. Before using the chemical, you should carefully read the instructions.

When running cases of mold formation in the bathroom, it is recommended to use powerful antiseptic agents. In the event that the fungus has managed to penetrate into such elements of decoration as tiles, lining and seams, the performance of repair works in the bathroom becomes inevitable. The fact that mold has the property of penetrating the structure of building material, thereby rapidly destroying it.

Surface treatment can only lead to a temporary result, but in order to get rid of the fungus once and for all, you will have to remove the entire wall covering. The next stage of the surface must be dried, after which carefully treated with a special antiseptic. Repeat the procedure of applying the formulation is desirable several times, because the spores of the spores can be very deep.

Choosing a remedy for mold control, it is very important to pay attention to the fact that the drug was intended for its removal, and not for preventive maintenance.