What kind of roller is better to paint the walls

If you have to paint a large surface, for example, a wall, you have to think carefully about which tool to do this, to spend a minimum of time and get a high-quality result. Among the variety of the painting tool, it is better to choose rollers that have been used for a long time all over the world.

Painting walls with a roller

Using a roller, you can quickly and evenly paint the walls.

As a rule, in today's modern market there are many varieties of rollers. They differ not only in purpose, but also in classes that characterize their texture, material, size and shape. What kind of roller is better to paint the walls? Let's consider the basic parameters of the selection of the roller for staining in more detail.

Roller Selection

Quality rollers are distinguished by a special classification, which determines the material from which the tool is made. It is a Latin letter that the roller manufacturer writes on the package. If there are no letters, then the material is not of high quality, although in many cases it can be used quite successfully.

Materials

Imitation fur roller

The roller made of artificial fur is very soft and can be used for painting any surfaces.

All the materials from which the rollers make are divided into artificial and natural. Artificial materials include the classifications of RA, RS, PE. PE are usually the softest artificial rollers. They can be made from artificial fur ordinary, reinforced, and also from thick soft foam rubber. RA - rollers are soft, but made of thinner synthetic materials, such as nylon, perlon. PC - rollers, which are made of polyacryl derivatives. As a rule, all artificial materials for rollers are not very expensive, even with very high quality.

Quite another matter - rollers made of natural materials. This is a tool of type N. This includes rubber, felt of different thickness, as well as all kinds of furs (goats, sheep, foxes, llamas and others). Felt and rubber rollers at their cost do not differ much from artificial ones. But the tool, which is made of natural fur, will cost more. But even with the purchase of such an expensive product, you need to pay attention to quality.

Experts on the basis of this classification recommend using natural rollers for painting expensive surfaces and expensive paint. After all, natural material is better in contact with surfaces, as a result of which they will be painted well. For simpler options, it makes sense to use a cheaper tool.

Individual subclasses

Roller made of natural wool

Roller from natural wool is usually used for painting expensive materials.

But even such a basic classification also has its subclasses. For example, fur rollers (both natural and artificial) can be divided into several types. This is a fur coat, a fur coat for the floor and a fur roller for painting the corners. Another subclass refers more to foam rolls, which are used to work with adhesive compounds.

Fur coat usual can be used successfully for painting walls, the surface of which has minor irregularities and defects. After all, fur can slightly hide them due to the interaction of fibers with the surface. Fur ridges for floors even more remove irregularities, but use them is acceptable only for horizontal surfaces. In all other cases, there is a risk of a strong ink leaking.

To paint the corners, both first and second rollers can be used. Here the main role will be played only by the form of the instrument. Only angular ridges are quite inconvenient to paint an even surface. Therefore, you do not need to buy an expensive roller for corners, which you will not use so intensively.

For glutinous compounds, experts advise the use of rollers based on foam rubber. After all, this material, like no other, can maximally allow the consistency of the glue to soak into the surface, thereby providing the best adhesion effect in the end.

Recommendations for selection

Roller made of foam rubber

Roller made of foam rubber is used for painting walls with water-based paints.

In addition to the general classification described above, there are also some practical recommendations of experts for choosing a good roller. It is on them that it is best to first build, when you are going to start painting some surface.

So, water-based paints, liquid types of glue and primers do not tolerate rollers and brushes with too soft and absorbing pile. Optimum option in this case will serve as a roller of ordinary foam rubber. The thicker foam rubber, the softer it is. But it is best to purchase a tool with medium-thickness foam rubber.

At the same time, please note that the foam nozzle will not last for very long. Therefore, if you plan to work hard for them, it is best to buy a pair of rollers. They are very inexpensive, and you will be much calmer. Only immediately check that all the pores in the foam rubber are optimally the same in size, and the roller itself had no visible significant defects.

Length of pile on rollers

The length of the pile on the rollers affects where they can be applied.

To paint smooth walls, you need to use a fur roller. Only the length of the fur should be short or medium. The material can be artificial or natural. The thicker the paint, the shorter the pile is to be used. Due to this, it will be much easier to distribute the paint over the wall surface.

What kind of roller paint walls with decorative plaster or with small reliefs? It is advisable to use a roller with a long pile and preferably natural. So you can paint all the pits of the plaster or the relief on the wall. But just check that the pile does not get out of the roller. This, incidentally, applies to all fur rollers. After all, it will be very difficult afterwards to dry up the villi after drying out the paint and repaint the surface again.

The roller based on polyamide threads is expensive, but also a very high-quality tool. Ideal for dyeing smooth walls. After all, due to the special arrangement of threads, it distributes the paint as evenly as possible, for a long time does not deteriorate. Only work with it carefully, so that the paint does not splatter beyond.

Textured painting

Textured roller

The texture roller should be made of strong materials, so that the picture on the wall turned out to be high-quality and not blurry.

Particular attention should be paid to the selection of rollers for the painting method of painting. This method involves drawing the pattern on the surface solely with a roller. The tool for this coloring is not cheap, and working with it requires certain skills and skill.

The main materials for textured rollers are rubber and foam rubber. Only materials are used of the highest quality. Choosing a foam rubber texture roller, the main thing is to check the strength of foam rubber. As a rule, during mechanical influences it is rather difficult to damage. But if the material is easily torn, then you will make a big mistake if you acquire such a tool.

The rubber roller should also be of the same quality. Rubber on the nozzle should be strong enough and thick. Only then the work can be done easily and qualitatively. Too thin layer of rubber is usually used by unscrupulous manufacturers who want to save on quality rubber.

So, now you know which roller better paint the walls.

There are a lot of different classifications that you can target. But much depends here also on your individual level of user-friendliness with the tool. Therefore, the main advice is to check the quality of fixing the material on the nozzle and how comfortable it will be for you to work with it, holding it in your hand.

Add a comment